Exterior Design
This plan presents a beautifully balanced **traditional Craftsman** façade with clean lines, stone accents, and welcoming porches.
The house footprint is **53 ft wide × 48 ft deep**, with a maximum ridge height of **23 ft 8 in**.
Wall framing is 2×6, giving flexibility for insulation and structural robustness.
A **front covered porch (78 sq ft)** softens the entrance and adds curb appeal.
Though not emphasized, the plan also shows an **unfinished basement** under the main floor, expanding future potential.
Interior Layout
All **1,550 sq ft** of heated area is on the main level — a single-story home.
Ceiling heights are **9 ft 1 in** in the first floor.
Core living functions—great room, dining, and kitchen—are combined in an **open concept layout** that maximizes flow and sightlines.
Vaulted ceilings are used over the living, kitchen, and dining areas to elevate the spatial experience.
Bedrooms are arranged in a **split layout**: the master suite is isolated on one side, while the two secondary bedrooms lie on the opposite wing.
A mud / laundry / half bath zone is placed near the garage entry for convenience.
Floor Plan:
Bedrooms & Bathrooms
This plan includes **3 bedrooms**.
It provides **2 full bathrooms + 1 half bathroom**.
The master suite enjoys its own full bath and closet.
The two secondary bedrooms share access to the second full bathroom.
Living & Dining Spaces
The open living area is vaulted, creating a dramatic focal zone for family and guests.
Because of the open plan and vaulted ceiling, daylight and views travel freely across the living, dining, and kitchen zones.
Kitchen Features
The kitchen opens into the dining and living areas, reinforcing connectivity.
Though cabinet layout details are not publicly listed, the plan includes notes about a **vaulted dining room** and open sightlines.
Outdoor Living (porch, deck, patio, etc.)
The front covered porch (78 sq ft) offers a sheltered arrival and a casual sitting spot.
From the open living area, large glazing or sliding doors (as typical in modern Craftsman plans) could lead to a rear patio or deck, though that layout isn’t explicitly detailed in the published plan.
Garage & Storage
An **attached 2-car garage (493 sq ft)** fronts the house and ties into the home’s side via a mudroom entry.
Storage needs are addressed via the garage, closets in all bedrooms, and cabinetry in service zones.
Bonus/Expansion Rooms
The plan includes an **unfinished basement (1,383 sq ft)** under the main floor, which allows significant expansion potential.
With the vaulted ceilings and open upper plan, creative ceiling or loft features might be added in future with structural work.
Estimated Building Cost
The estimated cost to build this home in the United States ranges between $350,000 – $550,000, depending on region, finishes, foundation, and site features.
Plan 770018CED elegantly balances traditional craftsmanship with modern openness. Its three-bedroom split layout, vaulted living core, attached garage, and future-ready basement make it versatile and appealing. If you want a home with both character and flexibility, this design is a strong choice.
